Microtek MV300 - Manual (Page 33)

33
Reset
Use the Reset option to restore all configurations to
factory default settings. To access the Reset option:
1. Turn on the DV camera and press the MENU button
to display the main menu screen.
2. Press the button to select the Setup menu option
at the top.
3. Use the / button to select the
Reset option.
4. Press the button to display the
submenu.
5. Use the / button to select
either OK or Cancel and press
the
button to perform the
function.
When you perform this function,
all settings are returned to the
original factory configuration and
any changes you made will be
lost.
Copy to SD
Use the Copy to SD function to copy all files stored in
the DV camera memory to the SD card. You may need
this function if you want to use the SD card in another
device to download your movies or images. To access
the Copy to SD function:
1. Turn on the DV camera and press the MENU button
to display the main menu screen.
2. Press the button to select the Setup menu option
at the top.
3. Use the / button to select the
Copy to SD option.
4. Press the button to display the
submenu.
5. Use the / button to select
either OK or Cancel and press
the
button to perform the
function.
All images stored in the DV
camera memory will be copied to
the SD card.