Maxtor Digital Multiplex Recorder - Manual (Page 48)

RS232 REMOTE PROTOCOL
44
KEY LOCK
For further security, you can “Lock” all buttons on your DMR. Locking disables the buttons and prevents other people from
using the system.
Press ENTER and MENU at the same time to enable Key Lock.
Press ENTER and MENU at the same time and key in password (Default : 0000), then press “ENTER“ to disable Key Lock.
TROUBLE SHOOTING
When malfunction occurs with DMR, it may be not serious and can be corrected easily. The table below describes some
typical problems and their solutions. Please check them before calling your DMR dealer.
PROBLEM SOLUTION
l Please Insert HDD
l Please use the Key to lock the HDD Cartridge
And press any key
l Check power cord connections.
l Confirm that there is power at the outlet.
l Check if it is under Key Lock mode.
l Press "MENU" & "ENTER" to exist Key Lock mode.
No recorded video l Check if the HDD is installed properly.
Timer Record enable
does not working l Check if the Record Enable is set to YES
l Check camera video cable and connections.
l Check monitor video cable and connections.
l Confirm that the camera has power.
l Check camera lens setting.
No live video
HDD Not Found
No power
Not working when
press any button