Tape operation / recording – Motorola FW-C155 User Manual

Page 21

Advertising
background image

21

English

Rewinding / Fast forwarding

1

Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.

2

Press

70 to stop rewinding or fast forwarding.

Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).

General information on
recording

● For recording, use only tape of IEC type I

(normal tape).

● The recording level is set automatically, regardless

of the position of the Volume, DBB, DSC and so
forth.

● The tape is secured at both ends with leader

tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.

● To prevent accidental recording, break out the

tab on the left shoulder of the tape side you
want to protect.

IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 1.

Preparation for recording

1

Load a recordable tape into tape deck 1 with full
spool to the left.

2

Prepare the source to be recorded.
CD 1/2/3 – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2 with the full spool to the left.

When recording is in progress

REC

starts flashing.

● It is not possible to listen to another source.

● It is not possible to activate the timer function

during recording or tape dubbing.

One touch recording

1

Press

CD 1/2/3 or TUNER to select the

source.

2

Start playback of the selected source.

3

Press ● on tape deck 1 to start recording.

To stop recording

● Press

70 on tape deck 1.

Tape Operation / Recording

Advertising