Problems water intake/drain 37, Frequently asked questions, Problems water intake/drain – Miele G 2420 G 2430 User Manual
Page 37
Advertising
Problems water intake/drain
Issue
Possible fault
Solution
The "Intake/Drain"
indicator is flashing.
The water supply is
shut off.
Open the water supply all the
way.
The dishwasher
stops.
The "Intake/Drain"
indicator flashes.
The time display
shows FXX.
Before fixing the fault:
–
Turn the dishwasher off s.
Fault F12/F13: Fault in
the water intake.
–
Open the water supply all the
way.
–
Clean the water intake filter,
see "User Maintenance
Instructions".
–
The water pressure at the
water connection is lower than
4.35 psi. Consult a plumber.
Fault F11: Fault in the
water drain. There may
be water in the wash
cabinet.
–
Clean the triple filter, the drain
pump and the non-return
valve. See "User Maintenance
Instructions".
–
Remove any kinks in the drain
hose.
Frequently asked questions
37
Advertising