MAGPiX B 1380 B1380 - Manual (Page 17)

17
2. Connect your MAGPiX B1380 to your computer.
Connect the large end of the included USB cable to the USB
port of your computer, and connect the smaller end of this cable
to the MAGPiX B1380. Then turn on your MAGPiX B1380. Your
computer will find new hardware and update its system. Follow
the onscreen instructions, if any. Please make sure that you
connect the B1380 directly to the USB port on your computer
and not through a USB hub.
If you receive a warning concerning the absence of a digital
signature, please continue with the installation and ignore the
warning. The B1380 drivers are fully compliant.
3. Downloading your pictures from the MAGPiX B1380.
Without using Presto! Mr.Photo Software:
1. Make sure the MAGPiX B1380 is connected with the USB
cable to your computer.
2. Turn the MAGPiX B1380 on.
3. Double click on "B1380" which can be found in Window system
"My Computer" file. (see Figure 17)