Memorex iMove MI3005 - Manual (Page 10)

9
OPERATION (CONTINUED)
Turn the Mi3005 on by pressing the
Power button; the display will light.
1
1
Press the MODE button to select
the desired band (AM or FM).
1
2
Repeatedly press the TUNE
Up/Down/Skip n / o buttons to
manually advance the frequency in
the display up or down until the
desired frequency appears.
For auto tuning, press and hold the
TUNE Up/Down/Skip n / o buttons
until the frequency in the display
starts to scan and then release; the
tuner will search and then stop on
the next strong station it finds.
Repeat this step until the desired
frequency appears in the display.
1
3
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
For private listening, plug in
headphones into the Headphones
jack on the rear of the Mi3005. The
speakers will be disconnected
when headphones are plugged in.
1
4
USING THE RADIO
Hints for Better Reception
AM–The AM ferrite bar antenna is located inside the unit. It may be
necessary to turn the unit slightly so that the internal antenna is pointing in
the direction of the AM transmitter. You may have to experiment to find the
position that provides the strongest reception for each of your favorite AM
stations.
FM–Extend the FM antenna for best FM reception.