Moulinex Odacio 3 DFC1 User Manual

Page 6

Advertising
background image

BLENDING/MIXING FINELY IN
THE LIQUIDISER (DEPENDING ON
MODEL) (DIAGRAM 6)

Accessory used

• Liquidiser jug (I)

Fitting the Liquidiser Jug
• Press the release button (A4) to open

the Liquidiser drive cover (A1).

• Place the ingredients in the liquidiser

jug (I3) and lock the lid by putting the

tab on the lid under the handle (I2) on

the jug.

• Fit the liquidiser jug (I) on the

Liquidiser drive (A2) (you will hear an

audible click).

If the lid and handle are not fitted
correctly onto the jug, the appliance
will not start.

Usage and practical tips

• Turn the speed selector (A5) to

position “1” or “2” to start the

appliance or, for better control over

the blending, use the “pulse” position.

• You can add ingredients during

blending through the hole of the

measuring cup (I1).

• Do not fill the liquidiser jug with

boiling liquid. Only use liquids or
food at simmering temperature
or below.

• Never use the blender to grind dry

ingredients (hazel nuts, almonds,

peanuts, sugar and spices etc.).

You can:
• prepare up to 1.5 litre of extra smooth

soup, sauces, stewed fruits, milk

shakes and cocktails.

• blend all types of batter (pancake,

fritters, waffles, Yorkshire pudding).

• crush ice at speed “2” no more than

a

1

/

4

full

• To remove the liquidiser jug from the

appliance, grasp it by the handle and

press the release button (A4).

6

Usage and practical tips
• Firmly hold one half of the citrus fruit

on the cone (H1).

• Turn the speed selector (A5) to pulse

or position “1” to start the appliance.

You can squeeze up to a litre of juice

without emptying the bowl.

SQUEEZING CITRUS FRUIT
(DEPENDING ON MODEL)
(DIAGRAM 5)

Accessories used

• Bowl (B3) and citrus press (H)

Fitting the accessories for the
citrus press
Press the release button (A4) to open

the Liquidiser drive cover (A1).
• Fit the bowl (B3) on the Bowl

accessory drive (A3).

• Fit the Citrus press spindle (H3) on

the bowl accessory drive (B3a).

• Fit the filter basket (H2) onto the

drive (H3).

• Fit the cone (H1) through the hole in

the strainer.

• Close the Liquidiser drive cover (A1).

You should hear a click.

5

2

1

5

10

9

Advertising