Magnat Audio PRO 1620 - Manual (Page 8)

8
GB
Fig. 1
(1) Depth
(2) Driver diameter
Fig. 1A
(1) Use mounting ring to mark position of speaker opening and fastening holes
(2) Cut out opening and drill holes
Make sure that the subwoofer is secured in such a way that it cannot slip or
slide. Use the screws provided for this purpose. Damage resulting from
sudden changes in speed (e.g. hard braking) is not covered under the terms
of our guarantee.
CONNECTING TO THE RADIO / AMPLIFIER (FIG. 2)
The speaker system should preferably be connected to an external power amplifier.
This can provide the required electrical power and create corresponding dynamic
reserves. The relevant instructions also contain the customized connection diagram
for the operation of a speaker system.
Should you not have a power amplifier, the speakers can also be connected directly
to the radio. The relevant operating instructions also contain the connection diagram
for this situation.
Please note that only limited dynamic reserves will be available in this case.
Excessively low outputs combined with high distortions can destroy your
speakers.
TWEETER PROTECTION POLYSWITCH
There is a protective element integrated into the crossover of your PRO tweeter,
which has high impedance in cases of overload and reduces the current flowing
through the tweeter. If the tweeter is deactivated, please turn down the volume and
wait for a moment. After cooling down, the tweeter will re-activate and is ready for
operation again.
INSTALLING THE GRILLE (FIG. 3)