Millet Sights TRS-2 - Manual (Page 5)

Turret locks
Exclusive feature of the Millett TRS scopes is the turret locks that prevent accidental
movement of the windage and elevation adjustments of the scope.
By tightening the ring at the base of the turrets to the right, the adjustment is locked.
Note; as the lock is positive, it is important to carefully adjust the turret when you have
unlocked the ring. There may be some tension when first moving the turret.
Do not try to over power the lock when the lock is tightened as this may damage the scope.
Fast Eye focus
At the rear of the scope there is adjustment that is used to focus the crosshairs to your
eyes. This is a diopter adjustment and is set from 2 + to – 3.5 diopter. Adjustment is
made by rotating the rear ring. Adjust until the crosshairs are sharp to your eyes.
Side range focus
On the left side of the scope there is a large knob that is used to remove parallax and
improve the focus of the scope at differing ranges. By turning the knob you can adjust
the scopes focus. Adjust until you have a sharp image of the target. The range marks
may not be absolutely accurate due to your eyes, lighting conditions and other factors.
It’s best to adjust the range focus for the best image and no parallax.
Parallax can be seen if the crosshairs move from the point-of-aim, when you shift your
eye from side-to-side or up-and-down while looking through the scope. This will effect
accuracy at longer ranges.
Zoom ring
On the TRS-1 you have a Zoom Ring that allows you to adjust the magnification of the
scope for differing shooting conditions. The scope is variable from 4X to 16X power.
The Mil-Dotbar is set to be 1 mil at 10X on the Zoom Ring. At this position, the Mil-Dot
and Mil-Dotbar is 3.6 inches at 100 yards. There is an indent at the 10X setting on the
Zoom Ring to aid in finding this position.
If your shooting requires the utmost accuracy, it is best to test fire the scope and
weapon at various power settings to assure your zero and to see how the magnification
effects your shooting accuracy.
Sun Shade
Helps to prevent glare and improves image in bright sunlight. Use care in screwing
sunshade into scope body.
5