Mitel 8500 - Manual (Page 46)

Call Features
Page 34 Mitel ® 8500 Telephone User Guide – Issue 14, June 2010
Changing the DND Settings
See “Using Do-Not-Disturb” on page 39 for more information about using DND.
To turn on DND using Remote Programming:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
page 30 for details on setting up a
Station password for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND using Remote Programming:
Follow steps 1 through 4, and then dial 371.
Changing the Manual Call Forwarding Settings
See “Manual Call Forwarding” on page 24 for more information about Manual Call Forwarding.
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
page 30 for details on setting up a
Station password for your extension.
5. Dial one of the following Call Forwarding feature codes:
• 355 (All)
• 356 (No answer)
• 357 (Busy)
• 358 (No Answer/Busy)
6. Enter either an extension number or 8 followed by a telephone number.
To turn off Call Forwarding using Remote Programming:
Dial 355, and then hang up.