M-AUDIO DX4 - Manual (Page 8)

8
Setting the Mid-Boost EQ Switch
This 2-position switch allows you to select either the “In” or “Out” Mid-Boost mode. The
Out mode produces a flat midrange response for normal monitoring and listening
conditions. The In mode will move the sound stage forward toward your listening position.
Placing the DX4
Placing the speakers is one of the most important considerations in accurately
monitoring sound. To monitor with the DX4s performing at their maximum capacity, an
appropriate listening environment and correct placement are required. Please refer to
the following for DX4 placement.
1. The two units and the listener should align to form a regular triangle. Refer to
the following diagram:
2. Position the monitors so that the tops of the woofers are level with your ears in
a normal listening environment. Refer to the following diagram:
'Mid-Boost In'