Metra Electronics 95-7313 - Manual (Page 8)

6
95-7313
K
I
T
A
S
S
E
M
B
L
Y
1
Slide the stacked ISO DIN units into
the trim plate bracket assembly and
secure the unit to the kit using the
screws supplied with the head unit.
(Figure B) 2
STACKED ISO DIN HEAD UNIT PROVISION
A
B
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A)
C
CUT
CUT
NOTE: For the 2003-2008 Hyundai Tiburon
applications you will need to cut and
remove the bottom mounting tabs on the
DDIN brackets. (Figure C)