Marantz VS3002 - Manual (Page 12)

7
ENGLISH
CONNECTIONS
AC IN AC IN
OFF OFF VP VP SR SR
OUTPUT OUTPUT REMOTE REMOTE LINK LINK
REMOTE REMOTE CONTROL CONTROL
EXTERNAL EXTERNAL INTERNAL INTERNAL
OUT OUT
IN IN FLASHER FLASHER IN IN RS-232C RS-232C
6 5 4 3 2 1
INPUT INPUT
2 1
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
VOLUME
UP DOWN
STANDBY PHONES
M-DAX ENTER MENU PURE DIRECT THX 7.1CH INPUT MODE AUTO MULTI
A/B
T-MODE MEMORY CLEAR DISPLAY
EXIT SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND SURROUND SPEAKER MULTI
M-DAX
POWER ON/OFF
STANDBY POWER
PAUSE PLAY
OPEN/CLOSE
STOP
ON/OFF LEVEL
+
PHONES
-
HDMI/DVI RESOLUTION
FL OFF
STANDBY POWER ON/OFF
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
INPUT
HDMI
HDMI
OUTPUT
HDMI
OUTPUT
DVD player
Blu-ray player HD-DVD player
Amp
Cable tuner
Satellite tuner
TV
Projector
Notes:
• Before connecting, be sure to switch off the unit and the other devices to be connected.
• Use cables that are appropriate for the devices to be connected.
• When connecting, fully insert the plugs into the jacks. Plugs that are not fully inserted could
cause a malfunction.
• Be sure to hold the plug when pulling out a cable. If you hold the cable itself when pulling it
out, it could damage the cable and cause a connection defect.
• Read carefully the instructions of the device to be connected before performing the
connections.
CONNECTING TO DEVICES WITH HDMI JACKS
7
Connecting to devices with HDMI output jacks
The unit is equipped with six HDMI input jacks. Connect to devices that are equipped with HDMI
output jacks (for example, DVD players, Blu-ray players, HD-DVD players, satellite tuners, cable
tuners, amps).
1. Connect one end of the HDMI cable to one of the INPUT 1 to 6 jacks on the rear panel of the
unit.
2. Connect the other end of the HDMI cable to the HDMI output jack of the output device.
7
Connecting to devices with HDMI input jacks
The unit is equipped with two HDMI output jacks. Connect to devices that are equipped with
HDMI input jacks (for example, video projectors, plasma TVs, LCD TVs, amps).
1. Connect one end of the HDMI cable to OUTPUT jack 1 or 2 on the rear panel of the unit.
2. Connect the other end of the HDMI cable to the HDMI input jack of the input device.