Muratec MFX-1430 - Manual (Page 29)

2-22 Network settings
Network.authentication.settings
This setting allows you to limit machine access to authorized users.
This feature is compatible with Active Directory or Windows NT Server 4.0.
The Network Authentication feature also supports Kerberos, the highest security
level within Active Directory. This product includes RSA BSAFE ® Cryptographic
software from RSA Security Inc.
When the setting is activated, users must enter their domain user name and pass-
word to authenticate themselves and access the machine.
identify themselves to use the machine. The administrator can check who has
logged on the network using the machine.
In Active Directory, the user’s information will be acquired through the LDAP v3
(using encrypted authentication) when the user is authorized. All outgoing e-mails
including Internet Faxes of the authorized user will be tagged with their e-mail
address when it is registered on the Active Directory, as opposed to the machine’s
e-mail address.
NOTE: • When the optional OfficeBridge Expansion kit is installed, the network
authentication feature is not available.
Setting.up.the.Authentication.Mode
The following four items must be registered prior to using the authentication mode:
• Server Type ..................... Select either Active Directory or Windows NT.
• Domain Name ................. Enter the domain name.
• Logout Time .................... Set the timer for automatic log out.
• Mode Authentication ...... Select which mode(s) will require authentication
copy, fax and/or scan.
Locating the authentication setting
1
Press [Setting] on the control panel.
2
Press [Management].
3
Press [Network Settings].
4
Press [Prev] or [Next] and then press [Authentication Settings].