Setting tone options, Viewing technical gps information, Setting the gps position – Magellan RoadMate 1415 User Manual
Page 59
User Options
50
Setting Tone Options
Provides a way of selecting the tone used to announce arrival at a maneuver or destination.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Tone Options.
3.
Select Bell, Chime or Beep.
4.
Tap Save to record the changes and exit.
Setting Voice Alerts (Text-to-Speech) [Magellan RoadMate 1415 and 1425 only]
Voice alerts are only available for English, French, German, Spanish and Italian languages.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Navigation Instruction.
3.
Tap “Announce street name” or “Announce exit ramp name” to select when text-to-speech
will be used to indicate maneuvers.
4.
Tap Save to record the changes and exit.
Viewing Technical GPS Information
This screen provides technical information about the satellites being used to compute the
GPS position.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap GPS Options.
3.
Tap GPS Status.
PRN: pseudo random number that identifies
the satellite
AZ: Azimuth of the satellite
EL: Satellite elevation
SNR: Satellite signal-to-noise ratio
TTFF: Time to First Fix (in seconds)
4.
Tap Back arrow to exit.
Setting the GPS Position
Setting a GPS position is useful if you are not getting satellite information quickly because the
Magellan RoadMate has travelled over 500 miles while turned off. Setting the GPS position will
allow the Magellan RoadMate to compute which satellites are available and calculate the position
quicker.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap GPS Options.
3.
Tap Set GPS Position.