Motorola PTP 300 - Manual (Page 14)

PTP SOLUTIONS GUIDE 14
Key pTp 300, 400, 500 and 600 Selling points
Remove System Bottlenecks in the Network with Increased Throughput
pTp 54300 and 58300:
• Up to 25 Mbps – aggregate throughput
pTp 54400 Lite:
• Up to 21 Mbps - aggregate throughput (30 Mbps - signaling rate)
• Software upgradeable to 43 Mbps
pTp 54400:
• Up to 43 Mbps - aggregate throughput (60 Mbps - signaling rate)
pTp 49400 Lite:
• Up to 17 Mbps - aggregate throughput
• Software upgradeable to 35 Mbps
pTp 49400:
• Up to 35 Mbps - aggregate throughput
pTp 54500 and 58500 Lite:
• Up to 52 Mbps – aggregate throughput
• Software upgradeable to 105 Mbps
pTp 54500 and 58500:
• Up to 105 Mbps – aggregate throughput
pTp 54600 and 58600 Lite:
• Up to 150 Mbps - aggregate throughput
• Selectable 10, 15 and 30 MHz channel sizes
• Software upgradeable to 300 Mbps
pTp 5600, 45600, 54600 and 58600:
• Up to 300 Mbps - aggregate throughput
• Selectable 5, 10, 15 and 30 MHz* channel sizes
* For the PTP 25600, the 30 MHz channel size is not FCC compliant
Establish Robust Links to Challenging Locations
• Single-hop, long-range LoS links – up to 124 miles (200 km) with PTP 400 and PTP 600 bridges or 155
miles (250 km) with PTP 300 and PTP 500 bridges
• Previously impossible or marginal links can now be established in:
> nLoS – up to 25 miles (40 km)
> NLoS – up to 6 miles (10 km)
> An area already saturated with RF
• Disaster recovery connectivity in a matter of hours
Reduce Capital and Deployment Costs
• Connect previously inaccessible locations in nLoS and NLoS conditions:
> Reach around buildings, trees, hills and over water
> Establish long-range LoS links with a single hop
• Meet the growing bandwidth requirements of voice, video and data
• Expand video surveillance applications beyond the constraints of an existing wired infrastructure
• Replace a wired connection with a higher-capacity, less expensive wireless connection
Eliminate Monthly Recurring Costs Associated with Leased T1/E1 Voice Circuits
• Built-in T1/E1 in PTP 600 systems:
> Single port on PTP 54600 and PTP 58600 Lite bridges
> Dual ports on PTP 54600 and PTP 58600 bridges
> Single port on PTP 25600 and PTP 45600 bridges with 10 and 15 MHz channel sizes
> Dual ports on PTP 25600 and PTP 45600 bridges with 30 MHz channel sizes
• Pair PTP 300, 400 and 500 Series bridges with a T1/E1 Multiplexer
• Provide Secure Communications
> Pre-programmed to communicate only with a user-configured partner to eliminate “man-in-the-
middle” attacks
> Utilize a complex proprietary scrambling mechanism for data transmission
> Another layer of security is available with 128-bit and 256-bit AES encryption (optional)