Morphy Richards Blender & mill - Manual (Page 4)

4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Operating controls Operating controls Operating controls Operating controls Operating controls
The blender control switch has the following
settings. Pulse, off, speed 1 and speed 2.
The speed can be adjusted whilst the blender
is in use.
Using the pulse button allows greater control
over the texture of the food produced. It is only
intended to be used for short ‘bursts’ of blending.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Operating the blender Operating the blender Operating the blender Operating the blender Operating the blender
Setting up
1 Ensure the blender base unit is unplugged
from the mains.
2 Place the blender jug onto the base unit
and turn anti-clockwise until the tabs on
the jug lock securely into the slots on the
base unit.
3 Place the food in the blender.
4 Place the lid
onto the blender. Then put the
filler cap into the lock position.
Always ensure the blender lid has clicked into
place.
5 Plug in the blender and turn the control switch
to either pulse, speed 1 or speed 2
depending on the desired consistency. Always
operate the blender with the lid in place.
6 Never operate the blender with more than
1500ml of liquid or when empty.
IMPORTANT:
Blender and Mill
To ensure the long life of your blender never run it
for longer than 60 seconds or the mill for longer
than 30 seconds. Switch off as soon as you have
reached the desired consistency.
• Don’t process spices they may damage the
plastic.
• The machine will not work if the blender or mill
is fitted incorrectly.
Blender only
• Don’t put dry ingredients into the blender
before switching on. If necessary, cut them
into pieces; remove the filler cap; then, with
the machine running drop the pieces through
one by one.
• Empty regularly
• Don’t use the blender as a storage container.
Keep it empty when not in use.
• Never blend more than 1 litre (1 3/4 pints) -
less for frothy liquids such as milk shakes.
Mill only
• Use for dry ingredients only
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Operating the mill Operating the mill Operating the mill Operating the mill Operating the mill
1 Put your ingredients into the mill attachment
jar and fill it no more than half full.
PULSE
CLEAN
OFF
SPEED 1
SPEED 2