Features, Before first use, Operating the appliance – Morphy Richards 0844 873 0720 User Manual

Page 6: Filter removal

Advertising
background image

44

FEATURES

Lid with finger pad

¤

Spout filter

Lid release button

Water level indicator x 2 with

illuminating light

fi

360° connector (concealed)

fl

Concealed element

On/off switch

·

Cordless base unit

Cord storage

BEFORE FIRST USE

Before using the appliance for

the first time, fill with water, boil,

pour away the boiled water, and

refill.

OPERATING THE

APPLIANCE

1

Wherever possible, fill through

the spout, as this helps to free

the filter from limescale

build-up.

The integrated water level

indicators allow you to easily

see the amount of water in the

kettle.

Always ensure that the

appliance is filled till the water is

visible through the level

indicator.

Boil only as much water as you

need as this saves electricity.

2

Place the appliance on the base

unit, ensuring the appliance

locates on to the 360°

connector.

The 360° connector allows the

appliance to be located at any

position - ideal for left and right

handed users and convenient

positioning on the worktop.

3

Plug in and switch on at the wall

socket.

4

Switch the appliance on. The

water level indicator will light up.

5

When the water boils, the

appliance will switch off

automatically.

Depending on the model variant

you have purchased, the kettle

light will go off.

If you are using the appliance for

the first time, pour away the

boiled water and refill.

6

Lift the appliance from the base

unit by the handle, ensuring you

hold the appliance level.

To re-boil, switch to ON again. If

the appliance has just switched

off, wait a minute or so before

switching it back on again.

If you do not put in enough

water, or switch on the

appliance when it is empty, the

safety cut-out will switch off the

power automatically. If this

happens, refill and wait a few

minutes for the element to cool,

then use as normal.

Filter removal

1

Open the lid.

2

Lift the filter upwards from it’s

location using the tab provided.

3

To refit the filter, slot it into the

side wall guides and press down

firmly. Ensure the filter is

correctly located into the central

guide.

WARNING: Make sure that

the filter is put in correctly,

otherwise the lid will not

close.

UUKK HHeellpplliinnee 00884444 887711 00995544

RReeppllaacceem

meenntt PPaarrttss 00884444 887733 00772200

IIrreellaanndd HHeellpplliinnee 11880000 440099 111199

43840 Rev1 23/10/08 16:17 Page 6

Advertising