Dmc1, Antenna connection, Wireless remote control connection – M&S Systems dmc1 User Manual
Page 10
dmc1
www.mssystems.com | 800.421.1587 |
www.mssystems.com
Page
10
Connect each yellow wire to a note selection terminal. (Do not connect
more than one yellow wire per note terminal.)
Plug in the modular chime plug to the 4 pin connector labeled as
CHIME on the dmc1 master unit as shown in figure 10.
Antenna Connection
Connect the FM dipole twin lead antenna to the FM 300 Ohm terminals on
the dmc1 master as shown in figure 10. Connect the orange AM antenna
wire to the AM terminal on the master.
Wireless Remote Control Connection
To install the optional wireless remote control receiver module MCRC,
attach the MCRC module using the Velcro strips provided to the wall
housing as shown in figure 10. Place the white antenna lead through the
hole provided in the wall housing into the wall cavity. Failure to do so
Figure 10 - dmc
1 connections