Melissa Chrome Series 246-003 User Manual

Page 11

Advertising
background image

MIXING:

Place beaters or dough hooks into the
ingredients before switching on to avoid
splashes.
Begin blending or mixing at a low speed. Follow
recipe instructions for additional speeds.
Ingredients can be added slowly during mixing.
Turn off the mixer as needed. To scrape sides
and bottom of bowl with a plastic spatula.
When mixing is completed, turn the unit to
0(=off) and wait till beaters or dough hooks stop
spinning before remove the mixer from the bowl.
If your mixing bowl is too full you will put an
excessive strain on the motor.
For the right speed refer to the end of these
instructions.

SPEED POSITION

Position 1 means that the hand mixer is turned off.
Position 1-5 is different speeds.
Position 1 is the lowest speed and 5 is the
highest speed.

MIXING GUIDE:

Speed

Description

2

This is a good starting
speed for bulk and dry
foods such as flour,
butter and potatoes.

3

Best speed to arts liquid
ingredients for mixing salad
dressings.

4

For mixing cakes, cookies
an quick breads.

5 For creaming butter and

sugar, beating uncooked
candy, desserts. For
whipping potatoes,
whipping cream. For
beating eggs, cooked
icings, liquid mixture etc.

M

Puls function with maximum
speed and turbo.

REMOVING THE BEATERS/DOUGH
HOOKS:

Unplug the mixer, set the speed control to 0(=off)
position. Scrape excess patter with a plastic
spatula. Grasp stems beaters/dough hooks with
your hand and press the release button on the
Beaters or dough hooks will unlock for easy
removal.

CLEANING

Before cleaning, always disconnect from the
mains.
Clean the beaters and the dough hooks in warm
soapy water or in the dishwasher.
WARNING: Never immerse the housing in water.
To clean the housing, wipe with a soft damp
cloth. Do not use scouring creams or powders.

THE WARRENTY DO NOT COVER:

-

If the above points have not been observed.

-

If the appliance has not been properly
maintained, if force has been used against it
or if it has been damaged in any other way.

-

Errors or faults owing to defects in the
electric distribution system.

-

If the appliance has been repaired or
modified or changed in any way or by any
person not properly authorised.

Importer:

Adexi A/S
Adexi AB

We take reservations for printing errors.

11

GTM-01A IM 27/01/03 11:45 Side 11

Advertising