Morphy Richards SpillMaster - Manual (Page 4)

44
ASSEMBLY
Assembling the
SpillMaster
A
The SpillMaster may arrive in
two parts.
To assemble the product, align
the arrows on the water tank
with the arrows on the top unit.
Push the two parts together and
rotate clockwise until the top
part clicks into place.
OPERATING THE
SPILLMASTER
Depending on your model of
cleaner, your SpillMaster may
require an adaptor.
If required, choose the
appropriate adaptor and fit as
shown B.
Attaching the
SpillMaster to you
vacuum cleaner
Assemble the vacuum cleaner
according to it’s instruction
booklet.
Ensure the vacuum cleaner is
switched off before attaching
the SpillMaster.
Attach the SpillMaster directly
onto the vacuum hose with
adaptor if required C.
It is not recommended to use
any extension tubes when using
the SpillMaster.
USING THE
SPILLMASTER
Turn the vacuum cleaner on.
Place the SpillMaster on the
floor and tilt forwards so the
nozzle touches the floor D.
You are now ready to pick up
any liquid spills.
The SpillMaster can be used on
all floor types but must only be
used for liquid spills. It has not
been designed to suck up
solids.
For maximum effectiveness, use
the SpillMaster in a steady, slow
motion, pulling it towards
yourself. Always ensure the
SpillMaster is tilted forwards E.
Ensure only the nozzle touches
the floor, so the water tank is
not dragged through the liquid
spill.
Backward strokes are more
effective on deeper carpets.
B
UUKK HHeellpplliinnee 00884444 887711 00994499 RReeppllaacceem meenntt PPaarrttss 00884444 887733 00771155 IIrreellaanndd HHeellpplliinnee 11880000 440099 111199
A
C
D
E
70330 rev1 19/6/08 10:15 Page 4