Motion Computing J3400 MDC001 - Manual (Page 12)

12 English
Motion Tablet PC information
Model CFT-003
The following section contains regulatory, precautionary, and usage
information for the Motion Tablet PC model CFT-003. Refer to “Specifications”
on page 11 for information about the type of power supply used with your
Tablet PC.
Note: The Motion Tablet PC model CFT-003 is a Class 1 product.
Setup precautions
• See the installation instructions before connecting the Tablet PC to the
power supply.
• When setting up the Tablet PC in the docking station, place it on a level
surface so it does not fall over and damage the unit, docking station, or
other components.
• When you move the Tablet PC between environments with very different
humidity and/or temperature ranges, allow sufficient time to adjust to
the new humidity or temperature.
• Do not drop the Tablet PC or subject it to other mechanical shocks.
• Do not apply heavy pressure to the Tablet PC or subject it to strong
impact. Excessive pressure or impact can cause damage to Tablet PC
components or otherwise cause malfunctions.
• Do not place the Tablet PC in an unsteady location. If the Tablet PC is
placed in an unsteady location, such as on an unstable stand or incline,
the Tablet PC may drop or tip over and cause injury.
• Do not place the Tablet PC in direct sunlight or next to equipment that
generates heat. This can damage the cabinet and components, and may
generate heat or fire.
• Do not use the Tablet PC AC adapter for other equipment. This can
generate heat or fire. In addition, do not use other AC adapters with the
Tablet PC.
• When using the Tablet PC for long periods of time, rest your eyes for
approximately ten to fifteen minutes every hour. Failing to rest your eyes
can cause eye strain and other deterioration of eye health.