Motion Computing J3400 MDC001 - Manual (Page 22)

22 English
Regulatory and safety compliance
The following sections describe regulatory and safety compliance by country
and by region.
Note: To determine which regulatory and safety marks apply to a specific
product, component, or accessory, check the product label affixed to the
product or its component.
Federal Communications Commission notice (USA)
Electromagnetic Interference (EMI) is any electromagnetic disturbance that
interrupts, obstructs, or otherwise degrades or limits the effective
performance of electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with authorized electronic
emissions, which may include television, AM/FM broadcasts, cellular services,
radar, air-traffic control, and pagers.
The FCC Rules and Regulations have established Radio Frequency (RF)
emission limits to provide an interference-free RF spectrum. Many electronic
devices, including computers, generate RF energy incidental to their
intended function and are, therefore, covered by these rules.
Your Motion Tablet PC, docking station, and all accessories meet the
regulatory agency limits for Electromagnetic Compatibility (EMC). EMC is the
ability of electronic devices, including computers, to function properly
together in the electronic environment. However, there is no guarantee that
in a specific installation it will not cause interference. Should this equipment
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try
to correct the interference by one or more of the following measures:
• Reorient the receiving antenna.
• Relocate the Tablet PC and the receiver.
• Separate the Tablet PC and the receiver.
• Plug the Tablet PC and receiver into different circuits.
You may also need to contact a radio/television technician for assistance.
Unintentional Emitter per FCC Part 15
The rating label on Motion Tablet PCs, Docking stations and all accessories
show which class (A or B) these devices fall into. Once you determine the class
of the device, refer to the following corresponding statement and to the FCC
notices in this Safety and Regulatory Guide.