MGE UPS Systems Pulsar EX 1500 - Manual (Page 14)

Page 14 - 51031604EN/AA
2. Installation
2.3 Connection to the RS 232 or USB communications port (optional)
1 - Connect the RS 232 25 or USB 26
communications cable to the serial port or
the USB port on the computer.
2 - Connect the other end of the
communications cable 25 or 26 to the RS
232 2 or USB 3 communications port
on the UPS.
The UPS can now communicate with all
MGE UPS SYSTEMS supervision, set-up or
safety software.
25
26
The RS 232 and USB communications ports cannot operate simultaneously.
3
2
RS232 USB
3 2