Miele dishwashers - Manual (Page 45)

Problem Possible cause Remedy
The dishwasher stops
running shortly after
starting a programme,
the in operation control
light is flashing rapidly. Before rectifying the prob-
lem you must:
Switch the dishwasher off.
Water inlet fault.
The indicator light "In-
let/Drain", seen when the
door is open, lights up
and flashes alternately. – Open the stopcock
fully.
– Check the water inlet
filter and clean if nec-
essary, see "Cleaning
the water inlet filter".
The Waterproof system
has reacted.
– Call the Miele Service
Department.
Problem solving guide
45