MITSUBISHI ELECTRIC WD-52525 - Manual (Page 21)

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Page 21
A/V Memory Ant 1/2
INPUTS
1/2/3
Component
1/2/DTV
1394 when
connected
HDMI Card 1~4
Contrast Max. Max. Max. Max. Max. Max.
Brightness Center Center Center Center Center Center
Sharpness Center Center Center Center Center Center
Color Center Center Center Center Center Center
Tint Center Center Center Center Center Center
Color Temp. High High High High High High
Video Noise Standard Standard Standard N/A Standard N/A
TV Film Mode (Auto) On On On N/A On N/A
TV DefinEdge VSM On On On On On On
Bass Center Center Center Center Center Center
Treble Center Center Center Center Center Center
Balance Center Center Center Center Center Center
Surround OFF OFF OFF OFF OFF OFF
Listen To Stereo N/A N/A N/A N/A N/A
Level Sound OFF OFF OFF OFF OFF OFF
A/V RESET DEFAULT SETTINGS (By Input)
A. A/V Memory
Each of the external inputs has its own Audio/Video Memory. A change in an A/V setting at a specific input is
stored in memory for that specific input.
B. A/V Reset
The AV Memory Reset in the user’s menu initializes the selected input’s A/V Memory.
Remote Control Operational Modes
There are two Remote Hand Unit Operational Modes, “Standard” and “NetCommand™”. The Remote is initially
in the “Standard” mode. The “NetCommand” mode is used when controlling Home Theater devices using
NetCommand. To change the Remote Operational Mode:
• Set the Remote to the TV Layer
• Point the Remote away from the TV.
• To change to “Netcommand” ... Hold the “Power” button and press “9-3-5” in sequence.
• To change to “Standard” ... Hold the “Power” button and press “0-0-0” in sequence.