Martin Audio LE2100 - Manual

LE2100
Three-way bi-amp, very high power, differential
dispersion stage monitor
features
◗
Two 12" (300mm) ultra-long excursion high power, neodymium motor
bass drivers
◗
6.5" (135mm) high power, phase plug loaded neodymium motor
midrange driver
◗
1" (25mm) exit titanium dome, neodymium motor compression driver
◗
Optimised constant directivity differential dispersion HF horn
◗
Symmetrical array, 3-way, bi-amp design
◗
Contemporary, multi-laminate ply and hardwood cabinet
◗
Frequency response 56Hz-18kHz ±3dB, -10dB @ 48Hz
◗
Discreet connectors
◗
Fitted with 4 x M8 rigging inserts
applications
◗
Very high power stage monitor
◗
Flown infill via optional yoke
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
The Martin Audio LE2100 is a very high performance monitor
designed for large-stage applications where maximum SPL’s are
required. It features twin, high-specification 12" (300mm) low
frequency drivers, a unique 6.5" (165mm) midrange device and a
1" (25mm) exit compression driver mounted on a differential
dispersion horn. Differential dispersion technology increases the
area over which a constant SPL and consistent frequency
response is maintained at ear height, enabling the artist to move
around more freely.
The LE2100 is best used with the DX1 controller to provide
crossover, limiting and EQ functions.
www.martin-audio.com
overall dimensions
technical specifications
TYPE Three-way reflex stage monitor with
symmetrically arrayed 2 x 12" LF, phase plug
loaded MF and differential dispersion HF horn
FREQUENCY RESPONSE (1) 56Hz-18kHz ± 3dB
-10dB @ 48Hz
DRIVERS 2 x 12" (300mm)/3" (75mm) voice coil, ultra-long
excursion, water resistant cone
6.5" (165mm)/2" (50mm) ccaw ribbon voice coil,
water resistant cone
1" (25mm) exit, 1.7" (44mm) voice coil titanium
dome HF compression driver
RATED POWER (2) LF: 800W AES, 3200W peak
MF + HF: 250W AES, 1000W peak
RECOMMENDED AMPLIFIER 800-2000W into 4 ohms
SENSITIVITY (3)
LF: 101dB
MF + HF: 102dB
MAXIMUM SPL LF: 130dB continuous, 136dB peak
(calculated @ 1m) MF + HF: 126dB continuous, 132dB peak
NOMINAL IMPEDANCE LF: 4 ohms
MF + HF: 8 ohms
DISPERSION (-6dB) 60º - 100º horizontal (differential dispersion)
60º vertical
CROSSOVER 606Hz active
3kHz passive
ENCLOSURE 89 litres
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL4
FITTINGS 4 x skids
4 x M8 inserts
DIMENSIONS (W) 826mm x (H) 385mm x (D) 582mm
(W) 32.5ins x (H) 15.2ins x (D) 22.9ins
WEIGHT 39.5kg (87lbs)
touring and theatre