Philips Magnavox MDV560VR - Manual (Page 2)

Quick-Use Guide (cont’d) Quick-Use Guide (cont’d)
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Playing a Disc
1
With the TV and DVD/VCR on, press the DVD
button to put the DVD/VCR in DVD mode.
2
Press OPEN/CLOSE / to open the disc tray. Put
a Disc in the tray with the label facing up and the
shiny side facing down.
Press OPEN/CLOSE / again to close the tray.
3
Playback may start automatically. If not, press
PLAY. If a DVD Disc menu appears, use the 1 234,
OK, or Number buttons to select features or start
playback. Follow the instructions in the menu.
4
To stop playing the Disc, press STOP.
3840R-Q004N
MDV560VR / 8239 300 31711
Printed in Indonesia
Setting TV Channels at the VCR
1
Turn on the TV and set it to channel 3.
2
Press POWER 2 to turn on the DVD/VCR.
3
Press VCR to put the unit in VCR mode. Then, press
SYSTEM MENU.
4
Press 3 or 4 to select the TUNING menu, then press
OK.
5
AUTO CHANNEL SET will be selected at the top of
the menu. Press 1 or 2 to start automatic channel
setup.
6
When channel setup is complete, the unit will go to the
lowest available TV channel automatically.The
DVD/VCR is ready for use!
Playable Discs
The DVD Player of the DVD/VCR will play the following Discs.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
1 ALL
Turn on
the TV to
channel 3.
4-5
4
LABEL
1
2
3
2
3
1
3