MACKIE MR8MK2 - Manual (Page 12)

12
MR8mk2
MR8mk2
Appendix C: Technical Information
AC Power Requirements
US: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Korea: 220 VAC, 60 Hz
Japan: 100 VAC, 50/60 Hz
Note: The MR8mk2 does not support multiple voltage
configurations. Make sure the voltage rating for your particular
model (as indicated on the rear panel near the IEC socket)
corresponds with your local AC mains voltage.
AC Connector:
3-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 3.15AL/250 V
230 VAC: T 1.6AL/250 V
Power Consumption:
100 watts with music, loud mix
20 watts quiescent (idle)
Physical Dimensions and Weight
Enclosure: 0.630 in / 16 mm thick MDF with
0.750 in / 19.5 mm MDF front panel
Damping:
Adiabatic batting
Dimensions:
Height: 15.7 in / 400 mm
Width: 10.9 in / 277 mm
Depth: 13.0 in / 330 mm
Weight: 27.6 lb / 12.5 kg
Disclaimer
LOUD Technologies is always striving to improve our products
by incorporating new and improved materials, components and
manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
MR8mk2 Specifications
Acoustic Performance
Free Field Frequency Response:
40 Hz – 20 kHz
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:
107 dB SPL @ 1m
Maximum SPL Per Pair: 119 dB SPL @ 1m
Transducers
Low Frequency: 8.0 in / 204 mm hyperbolic
curved cone woofer
High Frequency: Neodymium magnet driven
1 in / 25 mm silk dome tweeter
Amplifiers
Low Frequency Power: 100 watts, 4 Ω load,
200 watts peak
High Frequency Power: 50 watts, 8 Ω load,
100 watts peak
Type: Monolithic IC, Class AB with
DMOS power stage
Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 kΩ, balanced bridging;
10 kΩ unbalanced
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving
High Frequency EQ: ±2 dB @ 5 kHz, shelving
13.0" /
330 mm
15.7" /
400 mm
MR8mk2
WEIGHT
27.6 lb /
12.5 kg
10.9" / 277 mm