Motorola XPR 7550 - Manual (Page 94)

Advanced Features
English
82
4 ^
or
v
to the required device and press
c
to select.
OR
^
or
v
to Find Devices to locate available devices.
^
or
v
to the required device and press
c
to select.
5 ^
or
v
to Connect and press
c
to select. Display shows
Connecting to <device>.
Your Bluetooth-enabled device may require additional steps
to complete the pairing. Refer to respective Bluetooth-
enabled device’s user manual.
6 If successful, the radio display shows <Device>
Connected. A tone sounds and 9 appears beside the
connected device. The Bluetooth Connected icon appears
on the status bar.
OR
If unsuccessful, the radio display shows Connecting
Failed.
Do not turn off your Bluetooth-enabled device or press
d
during the finding and connecting operation as this cancels the
operation.
NOTE: If pin code is required, use the same entry method as
Step 2 in Accessing the Radio from Password on
page 78.
Disconnecting from a Bluetooth Device
Procedure:
1 On your radio, press
c
to access the menu.
2 ^
or
v
to Bluetooth and press
c
to select.
3
^
or
v
to Devices and press
c
to select.
4 ^
or
v
to the required device and press
c
to select.
5 ^
or
v
to Disconnect and press
c
to select. Display
shows Disconnecting from <device>.
Your Bluetooth-enabled device may require additional steps
to disconnect. Refer to respective Bluetooth-enabled
device’s user manual.
6 The radio display shows <Device> Disconnected. A
positive indicator tone sounds and 9 disappears beside the
connected device. The Bluetooth Connected icon
disappears on the status bar.
Switching Audio Route
You can toggle audio routing between internal radio speaker
and external Bluetooth-enabled accessory.
Procedure:
1 Press the programmed Bluetooth Audio Switch button.