Motorola BRAVO FLX - Manual (Page 2)

3
TURNING YOUR PAGER OFF
❶ Press X until pager off? is displayed.
❷ Press W to turn your pager off.
NOTE: The pager displays the time and date, but not
an alert mode indicator. If the alarm is set, the alarm
indicator
\ remains on the screen when the pager is
off.
RECEIVING AND READING MESSAGES
Your BRAVO FLX pager can receive up to sixteen 20-
character messages. When a message is received,
the pager alerts for eight seconds.
❶ Press any button to stop the alert.
❷ Press W to display the message.
❸ Press V twice while reading your message to
return to the standby screen.
Messages longer than 12 characters display on a
second screen, indicated by the
B symbol. Press W
to display the second screen. The second screen is
displayed automatically after one minute, even if
W is
n o t p r e s s e d .
The last screen of your message displays the mes-
sage slot number and the time received.
If a message is not read, the pager gives a reminder
alert every two minutes and the screen displays the
number of unread messages (i.e., 1 Page, 2 Pages)
until all messages are read.
If the pager receives more messages than its avail-
able memory can hold, the new message replaces
the oldest read, unlocked message.
4
An overflow condition occurs when all message slots
are filled with unread messages and a new message
is received. Upon receipt of a message, while the
pager is in the overflow condition, the oldest unread
message is discarded. In this mode, the overflow in-
d i c a t o r r e p l a c e s t h e d e fa u l t i d l e d i s p l a y
with
overflow . Messages must be read and erased
to clear the overflow display.
TURNING THE LIGHT ON AND OFF
❶ Press V to turn the light on.
❷ To turn the light off, press V again. The light turns
off automatically two seconds after returning to
the standby screen.
CHANGING ALERT MODES
❶ Press X . Either silent ? or audio ? is
displayed, depending on the current mode.
5
❷ If audio ? is displayed, the pager is in “Silent”
mode. Press W to change to “Audible” mode. The
pager chirps.
❸ If silent ? is displayed, the pager is in “Audible”
mode. Press W to change to “Silent” mode. The
pager vibrates.
For your pager to vibrate when a message is re-
ceived, it must be in “Silent” mode.
SELECTING AN AUDIBLE ALERT
❶ Press X until set alert ? is displayed.
❷ Press W again and the current alert number is
displayed, for example: alert 3 , and the pager
gives a sample of the alert tone.
❸ Press X until the desired alert type is displayed.
As each alert number is displayed, the pager
gives a sample of the alert tone.
❹ Press W to select the alert number, set the alert
tone to be used, and return to the standby screen.
When messages are received, your pager gives
the selected alert only when in the audible mode
D
.
SETTING THE TIME
❶ Press X until set time ? is displayed.
❷ Press W to set the time. The hour flashes.
❸ Press X to change the hour. Press W to switch to
the minutes. The first digit of the minutes flashes.
❹ Press X to change the first minute digit. Press W
to switch to the second digit. The second digit of
the minutes flashes.
6
❺ Press X to change the second minute digit. Press
W to switch to AM/PM. The a or p flashes.
❻ Press X to change AM/PM.
❼ Press V twice to return to the standby screen.
SETTING THE ALARM
❶ Press X until set alarm ? is displayed.
❷ Press W to select the alarm on/off sequence. on
or off flashes.
❸ Press X to turn the alarm on or off. Press W to
switch to the hours. The hour flashes.
❹ Press X to change the hour. Press W to switch to
the minutes. The first digit of the minutes flashes.
❺ Press X to change the first minute digit. Press W
to switch to the second digit. The second digit of
the minutes flashes.
❻ Press X to change the second minute digit. Press
W to switch to AM/PM. The a or p flashes.
❼ Press X to change AM/PM.
❽ Press V twice to return to the standby screen.
The symbol \ is displayed when the alarm is turned
on. The pager vibrates or gives a 20-second alert
and
alarm is displayed at the selected time.
If set, the alarm activates even when the pager is off.
Press any button to stop the alarm alert.
SETTING THE DATE
❶ Press X until set d ate ? is displayed.
❷ Press W to set the date in your pager. The month
flashes.