Maretron Alarm Module ALM100 - Manual (Page 6)

ALM100 User's Manual
Page A2 Appendix A – NMEA 2000 Interfacing Revision 1.1
1.3 ALM100 Accessories
Maretron offers the following accessories for the ALM100:
• CP-WH-ALM100
ALM100 White Faceplate
1.4 Quick Install
Installing the Maretron ALM100 involves the following five steps. Please refer to the individual
sections for additional details.
1. Unpack the box (Section 2.1)
2. Choose a mounting location (Section 2.2)
3. Mount the ALM100 (Section 2.3)
4. Connect the ALM100 (Section 2.4)
5. Configure the ALM100 (Section 2.5)
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron ALM100, you should find the following items:
1 – ALM100 Alarm Module
1 – ALM100 Black Faceplate
2 – ALM100 Mounting Screws
2 – Faceplate Mounting Screws
1 – Faceplate Gasket
1 – Sounder Volume Control Baffle Plate
1 – Sounder Volume Control Shutter
1 – Screw for Sounder Volume Control
1 – Sounder Collar
1 – Sounder Gasket
1 – ALM100 User’s Manual
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
Please consider the following when choosing a mounting location.
1. The ALM100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the ALM100 can be mounted on a horizontal deck,
vertical bulkhead, or upside down if desired.
3. The ALM100 is temperature-rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.