Morphy Richards Steam cleaner - Manual

Steam cleaner
with attachments
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your
new steam cleaner...
• Quick start
1 Fill the tank up to a maximum of 1.4 litres of water (using warm
water and less water will reduce heat-up time). Screw cap on
and tighten fully.
2 Attach the required accessories.
3 Connect to the power supply.
4 Press the on/off button to start heat-up. When orange light turns
off, the steam is ready.
5 Press the trigger on the handle to release the steam.
6 Aim the steam safely: Note at the start water may be ejected.
Hold over a sink or bucket until excess water has cleared.
• Descale
Descale regularly, do not wait for a problem to occur. In very hard
water areas we recommend using distilled water. See page 10 for
descaling instructions.
70530 Rev 4 2/6/04 2:53 PM Page 1