Magnadyne Marksman M5 - Manual (Page 5)

5
Your Marksman security system can be instructed to become armed or disarmed without the horn/siren
chirps by the remote transmitter. To operate this feature at any time, simply press and release the aux
button (3) then press the LOCK or UNLOCK button to arm or disarm your security system without the
chirp indications.
If your Marksman security system has become triggered, the horn/siren will sound for 60 seconds and
then stop and re-set to a fully armed condition.
Note: If a protected entrance is left open, your Marksman security system will remain triggered for two
more 60 second cycles then fully re-arm excluding the door input trigger. (Door input trigger is no
longer functional) Closing the entrance will re-set the door input trigger within 7 seconds.
Valet Operation: (The security system is already disarmed)
1. Turn the ignition key to the “on” position
2. Place the valet switch to the “on” position.
3a. The LED will be on solid indicating that the security system is in the valet mode.
(Ignition key “On”)
3b. The LED will flash once every 5 seconds indicating the security system in in valet mode.
(Ignition key “Off”)
How to Get Back to Security System Activation Mode:
1. Place the ignition key switch to the “on” position.
2. Place the valet switch to the “off” position.
3. Place the ignition key switch back to the “off” position. You will notice that the LED indicator
will be off. This indicates that you have exited the valet mode and your security system will
operate normally.
User Discretion Silent Arming
60 Second Re-Arming
Valet/Override Switch Operation (Continued)