Morphy Richards 47062 - Manual (Page 12)

1111
Cup selection
function
1 1 This machine has a special
selector that maintains the
quality of coffee brewed in
relation to the number of cups
selected.
There are two options available:
• 1/2 carafe (1-6 cups - Glass jug)
(1-5 cups - Thermal jug)
• 1 carafe (7-12 cups - Glass jug)
(6-10 cups - Thermal
jug)
2 2 The selection needs to be set in
relation to the amount of water
in the water tank and the
amount of coffee powder in the
filter.
3 3 The incorrect selection of this
function will not affect the
functionality of the machine
however the quality and taste of
the coffee brewed will be
affected.
4 4 If you find the strength selector
does not provide a weak or
strong enough cup of coffee to
suit your taste, the cup selection
function can be used in
conjunction to achieve a
stronger or weaker cup of
coffee.
• The table below shows the
settings to use in relation to the
volume of water in the tank to
help achieve a stronger or
weaker coffee. Feel free to
experiment with different
settings until you achieve the
desired strength of coffee to suit
your own personal taste.
Coffee quality
indicator
The coffee quality indicator will
show the quality of the coffee in
the carafe in relation to the time
since brewing was completed.
Quality of the coffee is a
personal choice. The quality
indicator gives an indication of
the quality and taste of coffee
after the brewing process is
complete.
It is not absolute and can differ
due to personal taste, or type of
coffee used.
The graph shown below gives
an indication of the relation
between each segment of the
display in relation to both quality
and time.
1-6
1-5 7-12
6-10
1/2 Standard Stronger
1 Weaker Standard
A
B C
D
E
47060 rev2 25/6/07 12:37 Page 12