Motorola RSG Series User Manual

Page 4

Advertising
background image

DATA SHEET

RSG SERIES
Residential Seamless Mobility Gateways

WHAT’S INCLUDED

Power supply and cord, Ethernet cable, vertical mounting
stand, and CD-ROM with User Guide

DIMENSIONS

1.6 in H x 5.5 in W x 7.5 in L (4.1 cm x 13.9 cm x 19.1 cm)

INDICATORS

RSG2500

8 multi-state LEDs

RSGu3502

10 multi-state LEDs

POWER

AC Input

90 to 264 VAC, 45 to 65 Hz

Average Consumption

4.8 W (nominal)

SYSTEM REQUIREMENTS

Broadband access (cable or DSL), PC with Ethernet port and
Web browser (for configuration), dual-mode handset and
accompanying wireless voice service

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature

0 °C to 40 °C (32 °F to 113 °F)

Storage Temperature

–30 °C to 80 °C (–22 °F to 176 °F)

Operating Humidity

5 to 95% R.H. non-condensing

Storage Humidity

95% R.H.

REGULATORY

CE, UL, FCC, CB, WEEE, and ROHS approved

DATA PORTS

1 WAN, 4 LAN (RJ-45 Ethernet plus)

WAN INTERFACE

Physical interface

RJ-45 10/100 Ethernet

Electrical interface

IEEE 802.3

Dynamic (DHCP) and static IP address assignment, PPPoE,
primary and secondary DNS servers, and device control and
discovery via UPnP

LAN INTERFACE

Physical interface

10/100 Ethernet RJ-45
(auto-sensing/auto-MDIX)

Electrical interface

IEEE 802.3

Enable/disable DHCP server, NAPT, bridge mode, and DMZ
Override/restore MAC address, dynamic DNS, DNS proxy

WIRELESS LAN

Wireless interface

IEEE 802.11b/g

Power output

19 dBm +1.0/–1.5 dB at all rates in all
channels (IEEE 802.11b),
16 dBm +1.0/–1.0 dB at 54 Mbps in all
channels (IEEE 802.11g)

Receiver sensitivity

> –90 dBm at 11 Mbps;
> –74 dBm at 54 Mbps

Certification

Wi-Fi IEEE 802.11b/g, Wi-Fi Protected
Access 2, Wi-Fi WMM, Wi-Fi WMM
power save

Antennas

One external removable, one internal

Mobile communication

User-friendly mobile secure pairing
with compatible dual-mode handset

Regulatory domains

US, Canada, ETSI, EMEA,
Asia Pacific, Latin America

ROUTING

NAPT routing with support for port forwarding, DMZ, VPN
pass-through, and full suite of application layer gateway
support

SECURITY

Stateful packet inspection firewall with pre-configured profiles,
including content filtering for parental control
IPSEC/PPTP/L2TP NAT tunneling (for VPN pass-through),
IEEE 802.11i security (WEP-64/128, WPA-PSK, WPA, WPA2,
TKIP, AES, 802.1x), 802.11i (pre-authentication)
Support for X.509 operator public key and device certificates

MANAGEMENT

Local and remote management using TFTP, HTTP, HTTPS
push/pull configuration, and firmware upgrade using XML
WAN HTTPS server for remote administration and diagnostics
IEEE 802.1p voice traffic prioritization

SEAMLESS MOBILITY ENHANCEMENTS

Quality-of-Service (QoS) IEEE 802.11e WMM admission

control

Power management

IEEE 802.11e WMM power save/
U-APSD (unscheduled-automatic
power save delivery)

Advertising
This manual is related to the following products: