MicroNet Technology SP218D - Manual (Page 10)

2.4 3-in-1 HDB15 Cable Installation
On the back of the KVM Switch, each of the 8 /16 PC ports has a HDB15 type
connector. Each cable that comes with the Switch has a 3-in-1 connector at
one end and a single HDB15 male connector at the other end. Plug the single
connector end of the cable into the KVM PC port, and then plug the other end
of cable to a PC VGA port.
PS/2 computer --- Plug in the PS/2 mouse connector to the computer mouse
port, then the PS/2 keyboard connector to computer keyboard port.
USB computer --- Install a PS/2-to-USB converter to the keyboard PS/2
connector, plug in USB connector to the PC USB port. This single USB port
can handle both keyboard and mouse data.
Note: The PS/2-to-USB converter is optional, please order C200K-C while
needed.
6