MicroNet Technology SP218D - Manual (Page 13)

Chapter 3 Operation
3.1 Push Button
Users can simply switch to a port by pressing the corresponding push button
on the LED. For 8 ports KVM Switch, please press button 1 ~ 8 directly to
select the port you want. For 16 ports KVM Switch, please press “Shift” button
and individual button 1~8 simultaneously to switch to the port from port 9 to
port 16. For example: Pressing “shift” button and 5 simultaneously to switch
to port 13, and the port red LED will turn on. After power on the KVM switch,
all of console ports will be linked to Computer port 1.
8-Port Front View
16-Port Front View
Press “BANK” button and the port button simultaneously will reset the KVM switch.
3.2 BANK 7-seg LED
When users want to view the next bank, please press “BANK” push button.
The bank LED will be changed from bank 1 to the maximum daisy chain level
and then to bank 1 again.
9