MicroNet Technology SP218D - Manual (Page 17)

3.5.1 Login Window
If the Security function is enabled (default is disabled), the Login window will
show up waiting for username and password when device powers on.
Parameter Default
SUPERVISOR
Username
00000000 (Eight Zeros)
SUPERVISOR
Password
00000000 (Eight Zeros)
These values are case-insensitive, while OSD display fixed in upper case.
After login or port switch by panel button, OSD or Hotkey, the Status screen
will show up to display the information of current settings. (Digit 1: BANK
NUMBER, Digit 2: PORT NUMBER, PORT NAME, and current Hotkey
settings. Pressing any key or moving mouse will let the Status screen
disappeared.)
Auto-LOGOUT function
y In Login window, if no input for username and password over 1 minute,
the screen will disappear. Hit any key to bring up the Login window
again.
y At normal operation, if no input from the console keyboard or mouse
over 10 minutes the KVM switch will turn off the screen display and
show up Login window asking for user name and password. One
more minute of keyboard/mouse inactivity, the monitor will be turned
off (Note the monitor LED turns from green color to orange color).
13