MicroNet Technology SP218D - Manual (Page 22)

3.5.9 Time Setting
When the Auto-Scan function is activated, the KVM switch will auto-scan the
host ports one by one according interval setting. Notice that the port without
connecting to a computer/server will be skipped on the scan. The interval
range is 5 ~ 99 seconds, and the default interval is 10 seconds. Press
<Enter> key to save the SCAN TIME setting.
3.5.10 OSD Mouse
Users can change the moving speed of mouse cursor in this item. There are
three levels to choose from. The fastest moving speed is
FAST, the second is
MIDDLE and the slowest is SLOW. Using "
↑ " and " ↓ " key on keyboard to
move highlight bar to the wished speed. Press the
<Enter> key to go into
effect.
18