Memorex MKS2430 - Manual (Page 13)

12
Press the Skip/Search ( ) ❶ or
( ) button ❷ to select the first
track that you wish to program.
When the desired track number
appears in the display, press the
PROGRAM button
❸ again.
1 2
3
4
Press either the Skip/Search ( )
❶ or ( ) button ❷ to select the
next track you wish to program.
When the desired track number
appears in the display, press the
PROGRAM button
❸ again.
1 2
3
5
Repeat step 5 until you have
programmed up to 19 track
numbers into the CD Program
Memory.
When the memory is full, “- -” will
appear in the display.
1 2
3
6
After programming up to 19 tracks in the CD Program Memory, press
the Play/Pause (Š ) button
❶ to begin programmed playback. The
PROGRAM indicator will blink and playback will begin on the first track
that you programmed. The player will continue to play all of the tracks
that you programmed in the order in which you programmed them.
When the last programmed track has been played, the player will stop
and the display will again show the total number of tracks on the disc.
If you press the PROGRAM button
❷ and then press the Play/Pause
(Š ) button ❶ again, playback will start on the first track you
programmed and will continue until all the programmed tracks have
been played.
1
2
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
REPEAT button twice. The
PROGRAM indicator will blink and
and the REPEAT indicator will light.
1
Press the Play/Pause (Š )
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Programmed Repeat operation
will continue indefinitely until you
press the Stop (
■) button or open
the CD door.
3
PROGRAMMED REPEAT
OPERATION (CONTINUED)
To cancel programmed playback, while in the Stop mode, press the PROGRAM button followed by the
Stop (
■) button or open the CD Door.
To check the programmed tracks, while in the Stop mode, press the PROGRAM button repeatedly to view
the programmed tracks.
MKS2430 O/M.QXD 7/2/03 9:22 AM Page 12