McIntosh XLS112 - Manual (Page 14)

14
Specifications
Specifications
Driver Complement
12 inch LD/HP Woofer
Frequency Response
35Hz to 200Hz (±3dB)
Maximum Sound Pressure Level
115dB
Power Output
400 Watts Sine Wave Continuous Power
Total Harmonic Distortion (Power Ampfier)
Maximum Total Harmonic Distortion at any power level
from 250 milliwatts to rated power output is 0.07%
Input Sensitivity
0.4V for Rated Output
A-Weighted Signal To Noise Ratio
115dB Below Rated Output
Input Impedance
20,000 ohms
Maximum Input Signal
9V
Low Pass Filter
40 - 120Hz (Variable Control on the Rear Panel)
Level Control
Variable Level Control on the Rear Panel
Power Control In
5 - 20 VDC Trigger
Power Requirements
100 Volts, 50/60Hz at 4.8 amps
110 Volts, 50/60Hz at 4.0 amps
120 Volts, 50/60Hz at 4.0 amps
220 Volts, 50/60Hz at 2.2 amps
230 Volts, 50/60Hz at 2.0 amps
240 Volts, 50/60Hz at 2.0 amps
Overall Dimensions
Width is 15-1/8 inches (38.42cm)
Height is 15-1/2 inches (39.37cm)
Depth is 15 inches (38.10cm)
Weight
87 lb. (39.50kg) net, 98 lb (44.5kg) in shipping carton