V-block – Memorex MT1192 User Manual
Page 24
– 23 –
For example :
If user chooses to block any program with TV-PG-V rating, all entries in that column
are automatically blocked as shown in table 2. At the same time it will cause no
blocking of any program with D, L, S rating. Similarly, the same will happen if user
Age-based
Rating
TV-Y
FV
D
L
S
V
TV-Y7
U
TV-G
TV-PG
U
U
U
U
U
U
U
U
B
B
B
TV-14
TV-MA
TABLE 2 : B = BLOCKED, U = UNBLOCKED
When the TV set receives any input signal with the selected rating level, the TV
automatically enable program blocking and V-BLOCK message is display on screen
together with the rating level as shown below. The channel blocking should always
cease if the input source is changed or if no rating data is received or if the channel
is changed.
MPAA RATING and TV RATING cannot be selected simultaneously so only one
rating system can be used at a time.
If you don't want to block MPAA RATING, set this Rating to OFF.
V-BLOCK
TV-PG-DLSV
V-BLOCK OPERATION
chooses to block other rating such as D, L or S.