Magnadyne M4-LCD - Manual (Page 33)

33
GPS Navigation Operation (M4-LCD Only) (continued)
NAV
Route Menu:
Touch the Route icon to save, load and edit your
routes.
1
2
3
4
5
6
7 8 9
1. Route Information: Contains data (estimated
arrival, route length, time left, distance left,
method of travel and warning icons) and some
of the functions you need while you navigate.
2. Itinerary: Is the list of the route driving instruc-
tions.
3. Edit Route: The list of route points appear with
the start point at the top of the list and the final
destination at the bottom. Touch one of the
route points in the list to edit. You can move
route points up or down in the list, reverse the
route, optimize the route or remove a route
point.
4. Load Route: You can navigate a route your
previously saved. You can choose to keep the
current GPS position as the start point, the
route will recalculated starting from your current
position.
5. Save Route: You can save the active route for
later use.
6. Delete Route: Erase the active route with all it
route points (start point, via points and destina-
tion).
7. Simulate: You can run a demonstration of the
route at normal speed.
8. Fly Over: You can run a demonstration of the
route at high speed.
9. Settings: Opens the route settings screen with
control to modify the vehicle, the road types
used for route calculation, or the route calcula-
tion method.