Mocomtech SLM-5650 - Manual (Page 74)

SLM-5650 Satellite Modem Revision 2
Front Panel Operation MN/SLM5650.IOM
4–4
4.1.2 Front Panel Keypad
The front panel keypad controls the local operation of the modem. The keypad consists of 18
keys. Each key provides one or more logical functions.
[ENTER] This key is used to select a displayed function, or to execute a modem
configuration change.
[CLEAR] This key is used to back out of a selection, or to cancel a configuration change,
which has not been executed using [ENTER]. Pressing [CLEAR] generally
returns the display to the previous selection.
g and h These keys are used to move to the next selection, or to move the cursor for
certain functions.
i and j These keys are used primarily to change configuration data (numbers), but are
also used at times to move from one section to another.
Numbers These buttons are used to enter a numerical value manually.
+
/- The +/- buttons allows the user to change signs.
IMPORTANT
The keypad has an auto-repeat feature. If a key is held down for more
than 3 second, the key action will repeat, automatically, at the rate of 7
keystrokes per second.
Figure 4-2. Keypad
The modem responds by beeping whenever a key is pressed:
• A single-beep indicates a valid entry and the appropriate action was taken.
• A double-beep indicates an invalid entry or a parameter is not available for
operation.