Miele G 2183 - Manual (Page 37)

Issue Possible fault Solution
Dishes are still wet,
glasses and cutlery are
spotted. The rinse aid setting may
be too low, or the rinse
aid reservoir is empty. Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Dishes were taken out too
soon. Leave dishes in longer,
see "Use".
A "Tab" product was
used. These products
have a low drying effect. Use a normal (powder or
gel) detergent and add
rinse aid.
White residue is visible
on cutlery and dishes.
Clouding occurs on
glassware and film can
be wiped off. Not enough rinse aid was
used. Increase the dosage, see
"Before using for the first
time".
A "Tab" product was
used. Use a normal (gel or
powder) detergent.
The salt container is
empty. Refill the salt container,
see "Before using for the
first time".
The salt container lid was
not correctly screwed on. Reseat it making sure it
screws back on correctly.
Frequently asked questions
37