Magnadyne 7" Color LCD Monitor M135C-4 - Manual (Page 6)

6
Installation Instructions
Pedestal Mounting the Monitor
1. Loosen the thumb wheel on the base support so the nut attached to the thumb wheel
can slide into the monitor’s mounting channel.
2. Slide the thumb wheel nut into the channel on the back of the monitor.
3. Position the monitor to the desired height and tighten the base support thumb wheel.
4. Adjust the tilt knob.
5. Use the double-sided foam (supplied) or mounting screws (not supplied) to secure the base
support to the desired location.
Monitor’s
Mounting
Channel
Base Support
Thumb Screw
Nut
Double Sided
Mounting Foam
Tilt Knob