About the battery, About the infrared led, About the electrostatic discharge – Mio 168 User Manual
Page 114
About the Battery
Use a specified charger approved by the manufacturer.
Do not mutilate, puncture, or dispose of battery in fire. The battery can burst
or explode, releasing hazardous chemicals.
Important instructions (for service personnel only)
Caution: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type recommended by the
manufacturer.
The battery must be recycled or disposed of properly.
Use the battery only in the specified equipment.
About the Infrared LED
The IR port located on the Pocket PC is evaluated as a Class 1 LED
(Light-Emitting Diode) device according to International Standard IEC 60
825-1 (EN60825-1) requirements.
CLASS 1 LED PRODUCT
About the Electrostatic Discharge
Electrostatic discharges can interfere with the normal functioning of the
electronic devices. Your equipment can behave abnormally owing to such an
event, resulting in the possible data corruption or loss of unsaved data. To
recover from this, reset your equipment.
To avoid losing data due to electrostatic discharges or other types of events, it is
recommended that you regularly save and backup data.
104