Magnadyne Universal Watertight Marine Radio Controller with Speed Indicators MRC-2U - Manual (Page 5)

5
Remote Installation
Inserting Strap:
Insert strap through the remote holder with tabs
facing outward.
Removing the Remote
Removing the Remote from Holder:
Press the release tab and slide out the remote.
To reinstall, slide the remote into the holder until
it snaps into place.
Release Tab
Connecting Strap:
Pull strap until the holes line up with the corre-
sponding tabs to reach desired tension.
Speed-Up / Slow-Down Indicator Installation
5 /
16”
Hole
1. Find a desired location that is clearly visible to
the driver.
2. Before installing the speed indicators, verify that
there are no obstructions behind the location
that could be damaged during installation.
3. Drill a 5/16” hole in the desired locations.
4. Feed the connector of the indicator cable through
the hole until the LED is securely fastened.
5. Remove the backing from the indicator cover and
attach the cover to the corresponding indicator.
Green Indicator = Speed-Up
Red Indicator = Slow-Down