Parameters, 1 parameter list, Parameter list – MITSUBISHI ELECTRIC FR-A5AR User Manual
Page 12
7
4.PARAMETERS
4.1 Parameter List
By installing this option unit, the parameters below are extended.
Set the values according to need.
The setting value of the parameter differs according to the inverter. Please refer to the inverter instruction
manual (output terminal function selection (Pr. 190 to)). (The setting value of negative logic can not be set.)
Parameter Number
Name
Setting Range
Factory Setting
320
RA1 output selection
0 to 99, 9999
0
321
RA2 output selection
0 to 99, 9999
1
322
RA3 output selection
0 to 99, 9999
2
REMAKS
For Pr.320 to Pr.322, write is disabled during operation even when “2” is set in Pr.77. When changing the parameter
setting, stop the operation.
ib66810b.book 7 ページ ２００２年２月１５日 金曜日 午前８時１０分
Technologies Inc.
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com